The robot incarnation and alter ego of Sevdaliza
The (my) lab shown in 'de Kennis van Nu' - NTR. Start of the Robot Theatre Lab project
Control hardware, software and mechatronics design for three theatrical robotic sea creatures by Exoot / Tristan Kruithof
Robot design, construction and live puppeteering for a play by Sonnevanck theatre and Silbersee
Lumi - the climate adaptive 'living' tiny house. A robot-theatre project which is actually inhabitable
Man Strikes Back (2020) is a performance by ‘Post uit Hessdalen‘ / Stijn Grupping. For this performance, I have worked on a number of position-controlled robot ‘wedges’. The control has been part of the MSc project of Teun van der
With participants from ASSortiMENS, students from the Creative Technology BSc program and Beeldbouw I have contributed to the design of an escape room at the Palthehuis, Oldenzaal with Cold War as the main theme. In the room (without giving any
An Arduino powered mechanical drum computer which is be controlled by an AKAI button panel. Small solenoids with 3D printed ‘tappers’ can be setup using the flexible arms to beat a beat out of anything… The project has been on
Astrobot has been showcased at RobotLove (2018) as an experiment about the believability of social robots. Astrobot is a 3D printed inMoov model robot, built as MSc thesis project by Stanislavs Semjonovs. It uses a camera for face detection and
This project has been a subject of Filip Vermeulens‘ Artist-in-residency project at the DesignLab, University of Twente. For this project, I helped to design the mechatronics: 60 linear sliders that move meshed curtains. The sliders are controlled by DMX, and
This ‘eyecatcher’ for the TechMed centre was developed by UT students in the DesignLab. I have been involved as team advisor and coach (and very proud and happy with the results)
Annelies is a crying humanoid robot, built as a ‘spare sister’ for L.A. Raeven. Her first public appearance was during the RobotLove exhibition in Eindhoven, 2018 as part of the Dutch Design Week. I was responsible for the electronics, software,
This robot has been subject of a number of theses at University of Twente – I did the design of the first version together with Takao Watanabe (from Waseda University, Tokyo) in 2013. In the meantime it has been used
Goal of this project is to realise a retirement home for all those 1998-style furbies who have been abandoned or replaced by newer, fancier models. The reFURBYshment aims at: reviving those abandoned furbies and give them a home, a nice